SPAGENT-MIB::spRelayArray2-6Status #

RelayArray2.6 sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Meaning #

This runbook is for the SNMP trap SPAGENT-MIB::spRelayArray2-6Status, also known as the RelayArray2.6 sensor trap. This trap is triggered when the RelayArray2.6 sensor reports an issue, and it provides detailed information about the sensor’s status, value, and threshold levels.

Impact #

The impact of this trap on the system and network can be significant, as it may indicate a hardware failure or malfunction. This could lead to:

• Data loss or corruption
• System downtime
• Unavailability of critical resources
• Increased risk of further failures or errors

Diagnosis #

To diagnose the issue, follow these steps:

1. Check the spSensorStatus variable to determine the current status of the sensor.
2. Verify the spSensorValue variable to see the current reading of the sensor.
3. Review the spSensorLevelExceeded variable to identify the threshold level that was exceeded.
4. Use the spSensorIndex variable to identify the specific sensor that triggered the trap.
5. Consult the spSensorName and spSensorDescription variables to gather more information about the sensor and its purpose.

Additionally, review system logs and monitoring data to identify any patterns or trends that may be related to the issue.

Mitigation #

To mitigate the issue, follow these steps:

1. Check the sensor and its connections to ensure they are secure and functioning properly.
2. Verify that the sensor is properly configured and calibrated.
3. Review the threshold levels and adjust them if necessary to prevent false positives.
4. Perform a system reboot or reset the sensor if necessary.
5. If the issue persists, consider replacing the sensor or seeking further technical support.

By following these steps, you can quickly diagnose and mitigate the issue, minimizing the impact on your system and network. #