SPAGENT-MIB::spRelayArray3-7Status #

RelayArray3.7 sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP Trap description:

Meaning #

The SPAGENT-MIB::spRelayArray3-7Status trap indicates that the RelayArray3.7 sensor has triggered an alert. This sensor is designed to monitor a specific aspect of the system, and the trigger indicates that a threshold has been exceeded.

Impact #

The impact of this trap depends on the specific sensor and the threshold that has been exceeded. However, in general, this trap indicates that the system is operating outside of normal parameters and may require attention to prevent damage or data loss. The specific impact could include:

• System downtime or instability
• Data loss or corruption
• Increased risk of hardware failure
• Decreased system performance

Diagnosis #

To diagnose the cause of the trap, follow these steps:

1. Identify the sensor that triggered the trap using the spSensorIndex variable.
2. Check the spSensorStatus variable to determine the current status of the sensor.
3. Review the spSensorValue variable to see the current reading of the sensor.
4. Compare the spSensorValue to the spSensorLevelExceeded variable to determine the threshold that was exceeded.
5. Check the spSensorName and spSensorDescription variables to understand the purpose and location of the sensor.

Mitigation #

To mitigate the effects of this trap, follow these steps:

1. Investigate the cause of the threshold exceedance and take corrective action to bring the sensor reading back within normal parameters.
2. Check the system logs for related errors or warnings that may indicate the root cause of the issue.
3. Perform a visual inspection of the sensor and related hardware to ensure there are no physical issues or damage.
4. Consider adjusting the threshold settings for the sensor to prevent false positives or nuisance alarms.
5. Notify relevant teams or personnel of the issue and the steps taken to resolve it.