SPAGENT-MIB::spRelayArray8-3Status #

RelayArray8.3 sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap:

Meaning #

The SPAGENT-MIB::spRelayArray8-3Status SNMP trap indicates that the RelayArray8.3 sensor has exceeded a predetermined threshold, triggering an alarm. This trap is sent when the sensor status changes to an abnormal state, requiring attention from the operations team.

Impact #

The impact of this trap is that the RelayArray8.3 sensor is not functioning within normal parameters, which may affect the overall system performance, reliability, or availability. This could lead to service disruptions, data loss, or equipment damage if not addressed promptly.

Diagnosis #

To diagnose the issue, perform the following steps:

1. Check the spSensorStatus variable to determine the current status of the sensor (e.g., 0 = normal, 1 = warning, 2 = critical).
2. Review the spSensorValue variable to see the current reading of the sensor.
3. Check the spSensorLevelExceeded variable to determine the threshold level that was exceeded, triggering the trap.
4. Identify the sensor using the spSensorIndex, spSensorName, and spSensorDescription variables.
5. Verify the sensor’s configuration and settings to ensure they are correct and up-to-date.
6. Check the system logs for any related errors or issues.

Mitigation #

To resolve the issue, perform the following steps:

1. Acknowledge the trap and notify the responsible teams (e.g., operations, maintenance).
2. Investigate the root cause of the issue, using the diagnosis steps above.
3. Take corrective action to return the sensor to a normal operating state (e.g., adjust settings, perform maintenance, replace the sensor).
4. Verify that the sensor is operating within normal parameters before closing the incident.
5. Update the sensor configuration and settings as needed to prevent similar issues in the future.
6. Document the incident and root cause analysis for future reference.