SPAGENT-MIB::spSwitch17Status #

Switch sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP Trap SPAGENT-MIB::spSwitch17Status:

Meaning #

The SPAGENT-MIB::spSwitch17Status trap is a switch sensor trap that indicates a sensor on a switch has exceeded a predefined threshold, triggering an alert. This trap is generated when a sensor on the switch reports a value that is above or below a configured level, indicating a potential issue with the switch’s operating environment.

Impact #

The impact of this trap can be significant, as it may indicate a potential problem with the switch’s operation or the surrounding environment. If left unaddressed, this issue could lead to switch failure, network downtime, or reduced performance. The specific impact depends on the type of sensor that triggered the trap and the nature of the exceeds threshold.

Diagnosis #

To diagnose the root cause of this trap, follow these steps:

1. Identify the sensor that triggered the trap by checking the spSensorName and spSensorDescription variables.
2. Determine the current value of the sensor by checking the spSensorValue variable.
3. Compare the current value to the threshold value that was exceeded, as indicated by the spSensorLevelExceeded variable.
4. Check the spSensorStatus variable to determine the current status of the sensor.
5. Review the switch’s logs and monitoring systems to identify any other related issues or trends.
6. Physically inspect the switch and its environment to identify any potential causes of the issue (e.g., high temperatures, humidity, etc.).

Mitigation #

To mitigate the issue, follow these steps:

1. Address the underlying cause of the sensor threshold exceedance, based on the diagnosis results.
2. Adjust the sensor threshold values as needed to ensure the switch is operating within a safe range.
3. Perform any necessary maintenance or repairs to the switch or its environment to prevent future occurrences of this issue.
4. Monitor the switch and its sensors closely to ensure the issue has been fully resolved.
5. Update the switch’s configuration and monitoring systems to prevent similar issues in the future.

Remember to consult the switch’s documentation and manufacturer’s guidelines for specific instructions on how to address the issue and adjust the sensor thresholds. #