spSwitch33Status

SPAGENT-MIB::spSwitch33Status #

Switch sensor trap

Variables #

  • spSensorStatus
  • spSensorValue
  • spSensorLevelExceeded
  • spSensorIndex
  • spSensorName
  • spSensorDescription

Definitions #

spSensorStatus
The current integer status of the sensor causing this trap to be sent
spSensorValue
The current integer value of the sensor causing this trap to be sent
spSensorLevelExceeded
The integer level that was exceeded causing this trap to be sent
spSensorIndex
The integer index of the sensor causing this trap to be sent
spSensorName
The name of the sensor causing this trap to be sent
spSensorDescription
The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap SPAGENT-MIB::spSwitch33Status:

Meaning #

The SPAGENT-MIB::spSwitch33Status trap is a switch sensor trap that indicates an issue with a sensor on a switch. The trap is sent when a sensor reaches a certain threshold or level, and provides information about the sensor that triggered the trap.

Impact #

This trap may indicate a potential problem with the switch or its environment, such as overheating, power issues, or fan failure. If left unaddressed, this issue could lead to switch downtime, data loss, or even physical damage to the equipment.

Diagnosis #

To diagnose the issue, follow these steps:

  1. Identify the sensor: Check the spSensorIndex and spSensorName variables to determine which sensor triggered the trap.
  2. Check the sensor status: Examine the spSensorStatus variable to determine the current status of the sensor.
  3. Evaluate the sensor value: Check the spSensorValue variable to see if the sensor reading is within a normal range.
  4. Determine the level exceeded: Check the spSensorLevelExceeded variable to see what level was exceeded, causing the trap to be sent.

Mitigation #

To mitigate the issue, follow these steps:

  1. Investigate the sensor issue: Perform a physical inspection of the switch and the sensor to identify the root cause of the issue.
  2. Take corrective action: Based on the diagnosis, take corrective action to resolve the issue, such as replacing a faulty sensor, cleaning dust from a fan, or adjusting the switch’s environment.
  3. Verify the sensor status: After taking corrective action, verify that the sensor status has returned to normal and the trap is no longer being sent.
  4. Update maintenance records: Update maintenance records to reflect the issue and the corrective action taken.
Edit this page