SPAGENT-MIB::spSwitch37Status #

Switch sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap description:

Meaning #

The SPAGENT-MIB::spSwitch37Status trap is generated when a switch sensor reports a status change. This trap is sent when a sensor on the switch exceeded a certain level, indicating a potential issue that requires attention.

Impact #

The impact of this trap is limited to the specific sensor that triggered the trap. However, depending on the sensor and its function, it may affect the overall performance, reliability, or availability of the switch or the network. For example, a temperature sensor exceeding a certain level may indicate a cooling issue that, if left unchecked, could lead to a switch failure.

Diagnosis #

To diagnose the issue, follow these steps:

1. Identify the sensor that triggered the trap by looking at the spSensorIndex and spSensorName variables.
2. Check the spSensorStatus variable to determine the current status of the sensor (e.g., okay, warning, critical).
3. Review the spSensorValue variable to see the current value of the sensor.
4. Compare the spSensorValue to the spSensorLevelExceeded variable to determine the threshold that was exceeded.
5. Consult the spSensorDescription variable to understand the significance of the sensor and the potential impact of the exceeded threshold.

Mitigation #

To mitigate the issue, follow these steps:

1. Investigate the root cause of the sensor exceeding the threshold (e.g., temperature issue, fan failure, etc.).
2. Take corrective action to address the root cause (e.g., clean the switch, replace a fan, etc.).
3. Monitor the sensor to ensure the value returns to a safe range.
4. Consider configuring alerts or thresholds for other sensors to prevent similar issues in the future.
5. Update maintenance schedules or procedures to prevent similar issues from occurring.