SPAGENT-MIB::spSwitch45Status #

Switch sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap SPAGENT-MIB::spSwitch45Status:

Meaning #

This SNMP trap is generated when a switch sensor detects an abnormal condition, such as a temperature or voltage reading exceeding a predetermined threshold. The trap includes information about the sensor that triggered the event, including its status, value, and description.

Impact #

The impact of this trap depends on the specific sensor and threshold that was exceeded. However, in general, it can indicate a potential problem with the switch’s environmental conditions, such as overheating or voltage fluctuations, which can lead to hardware failures or downtime if left unchecked.

Diagnosis #

To diagnose the cause of this trap, follow these steps:

1. Identify the sensor that triggered the trap using the spSensorIndex and spSensorName variables.
2. Check the current value of the sensor using the spSensorValue variable and compare it to the threshold value that was exceeded (spSensorLevelExceeded).
3. Consult the switch’s documentation and alarm logs to determine the normal operating range for the sensor and any potential causes for the abnormal reading.
4. If necessary, physically inspect the switch and sensor to determine if there are any signs of hardware failure or environmental issues.

Mitigation #

To mitigate the impact of this trap, follow these steps:

1. Take immediate action to address the underlying cause of the sensor reading exceeding the threshold. This may involve adjusting the switch’s environmental settings, replacing a faulty sensor, or performing maintenance tasks to prevent hardware failures.
2. Verify that the sensor reading has returned to a normal range and that the trap is no longer being generated.
3. Update the switch’s configuration and monitoring systems to ensure that similar traps are caught and addressed promptly in the future.
4. Document the incident and the steps taken to resolve it in the problem management system to ensure that knowledge is retained and improvements can be made to prevent similar incidents in the future.