SPAGENT-MIB::spSwitch61Status #

Switch sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap description:

Meaning #

This SNMP trap indicates that a switch sensor has exceeded a predetermined level, triggering an alarm. The specific sensor and its corresponding values are included in the trap message.

Impact #

The impact of this trap is that the switch is reporting an issue with one of its sensors. This could indicate a hardware problem, environmental issue, or other fault that requires attention. Ignoring this trap could lead to further damage or downtime if left unresolved.

Diagnosis #

To diagnose the issue, follow these steps:

1. Identify the sensor that triggered the trap using the spSensorIndex and spSensorName variables.
2. Check the current value of the sensor using the spSensorValue variable.
3. Determine the level that was exceeded using the spSensorLevelExceeded variable.
4. Review the sensor description using the spSensorDescription variable to understand the context of the alarm.
5. Verify the status of the sensor using the spSensorStatus variable.

Mitigation #

To mitigate the issue, follow these steps:

1. Investigate the cause of the sensor alarm, such as a hardware fault or environmental issue.
2. Take corrective action to resolve the issue, such as replacing a faulty component or adjusting the environment.
3. Verify that the sensor value has returned to a normal state.
4. Clear the alarm in the monitoring system.
5. Perform a thorough check of the switch to ensure that there are no other issues or alarms present.