SPAGENT-MIB::spSwitch63Status #

Switch sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNP Trap description:

Meaning #

The SPAGENT-MIB::spSwitch63Status trap indicates that a switch sensor has exceeded a certain threshold or level, triggering an alert. This trap is sent by the switch’s SNMP agent when a switch sensor reports a critical or abnormal reading.

Impact #

The impact of this trap can vary depending on the specific sensor and threshold exceeded. However, it could indicate a potential issue with the switch’s environmental conditions, such as temperature, humidity, or power supply. If left unaddressed, this issue could lead to switch failure, network downtime, or data loss.

Diagnosis #

To diagnose the issue, perform the following steps:

1. Identify the sensor: Check the spSensorName and spSensorDescription variables to determine which sensor triggered the trap.
2. Check the sensor value: Examine the spSensorValue variable to see the current reading of the sensor.
3. Determine the threshold: Check the spSensorLevelExceeded variable to see the level that was exceeded, which triggered the trap.
4. Verify the switch’s environmental conditions: Check the switch’s environmental conditions, such as temperature and humidity, to see if they are within normal ranges.
5. Check for any other related traps or logs: Review other trap logs or system logs to see if there are any related issues or errors.

Mitigation #

To mitigate the issue, perform the following steps:

1. Investigate and address the environmental condition: If the issue is related to an environmental condition, take corrective action to bring the condition back within normal ranges.
2. Check and replace the sensor if necessary: If the sensor is faulty or malfunctioning, consider replacing it to ensure accurate readings.
3. Adjust the threshold level: If the threshold level is set too low or too high, adjust it to a more appropriate level to prevent false alarms.
4. Verify the switch’s configuration: Review the switch’s configuration to ensure it is properly set up and that all sensors are configured correctly.
5. Monitor the switch’s status: Continuously monitor the switch’s status to ensure the issue is resolved and does not recur.