SPAGENT-MIB::spSwitch8Status #

Switch sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP Trap description:

Meaning #

The SPAGENT-MIB::spSwitch8Status trap is a switch sensor trap that is triggered when a sensor on the switch exceeds a predetermined level. This trap is sent to alert administrators of a potential issue with the switch’s environmental conditions, such as temperature, voltage, or fan speed.

Impact #

The impact of this trap depends on the specific sensor that triggered the trap and the level that was exceeded. Potentially, this could indicate a serious issue with the switch’s functionality, such as:

• Overheating, which could lead to equipment failure or downtime
• Voltage fluctuations, which could cause data corruption or equipment damage
• Fan failure, which could cause overheating or equipment failure

Diagnosis #

To diagnose the issue, follow these steps:

1. Check the spSensorStatus variable to determine the current status of the sensor.
2. Check the spSensorValue variable to determine the current value of the sensor.
3. Check the spSensorLevelExceeded variable to determine the level that was exceeded.
4. Check the spSensorIndex variable to determine the index of the sensor that triggered the trap.
5. Check the spSensorName and spSensorDescription variables to determine the name and description of the sensor that triggered the trap.
6. Check the switch’s event logs and system logs for any related errors or warnings.
7. Physically inspect the switch to ensure that it is properly ventilated and that all fans are operational.

Mitigation #

To mitigate the issue, follow these steps:

1. Take immediate action to rectify the environmental condition that triggered the trap (e.g., adjust the thermostat, replace a failed fan, etc.).
2. Verify that the switch is properly configured to send alerts and notifications for environmental issues.
3. Consider implementing additional monitoring and logging to detect potential issues before they become critical.
4. Schedule a maintenance window to perform additional diagnostic tests and repairs as needed.
5. Consider replacing the switch if it is old or has a history of repeated environmental issues.