SPAGENT-MIB::spSwitchStatus #

Switch sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP Trap description:

Meaning #

The SPAGENT-MIB::spSwitchStatus trap is generated when a switch sensor detects an abnormal condition. This trap indicates that one of the sensors on the switch has exceeded a certain threshold, triggering an alert.

Impact #

The impact of this trap can vary depending on the type of sensor and the threshold exceeded. Possible impacts include:

• Equipment failure or malfunction
• Environmental issues (e.g. temperature, humidity)
• Power supply issues
• Cooling system failures
• Other hardware-related problems

Diagnosis #

To diagnose the issue, follow these steps:

1. Identify the sensor that triggered the trap by examining the spSensorIndex and spSensorName variables.
2. Determine the current status and value of the sensor using the spSensorStatus and spSensorValue variables.
3. Check the spSensorLevelExceeded variable to determine the threshold that was exceeded.
4. Review the spSensorDescription variable for additional context about the sensor and its function.
5. Verify the switch’s environmental conditions, power supply, and cooling system to ensure they are within normal operating ranges.
6. Check the switch’s event logs for any related errors or warnings.

Mitigation #

To mitigate the issue, follow these steps:

1. Investigate and address the underlying cause of the sensor threshold exceedance.
2. Take corrective action to return the sensor value to a normal range (e.g. adjust temperature settings, replace a faulty component).
3. Verify that the sensor is functioning correctly and accurately reporting its status.
4. If the issue persists, consider replacing the sensor or the entire switch.
5. Update the switch’s configuration to adjust the sensor threshold or alert levels as necessary to prevent future false positives.
6. Perform regular maintenance and monitoring of the switch’s sensors and environmental conditions to prevent similar issues from occurring.