SPAGENT-MIB::spTemperatureArray7-8Status #

Temperature sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap description:

Meaning #

The SPAGENT-MIB::spTemperatureArray7-8Status SNMP trap indicates that a temperature sensor has exceeded a certain threshold, triggering a warning or alert condition. This trap is sent by the SP Agent and provides information about the sensor that caused the trap to be sent.

Impact #

This trap may indicate a potential environmental issue affecting the device or system being monitored. High temperatures can lead to equipment failure, downtime, and data loss. Ignoring this trap may result in further damage or operational disruptions.

Diagnosis #

To diagnose the issue, follow these steps:

1. Identify the affected sensor: Use the spSensorIndex and spSensorName variables to identify the specific temperature sensor that triggered the trap.
2. Check the sensor value: Use the spSensorValue variable to check the current temperature reading of the affected sensor.
3. Determine the exceeded level: Use the spSensorLevelExceeded variable to determine the threshold value that was exceeded, triggering the trap.
4. Verify sensor status: Use the spSensorStatus variable to verify the current status of the affected sensor.
5. Consult sensor description: Use the spSensorDescription variable to understand the purpose and location of the affected sensor.

Mitigation #

To mitigate the issue, follow these steps:

1. Investigate environmental conditions: Check the environmental conditions surrounding the device or system to identify the cause of the high temperature.
2. Verify cooling system operation: Ensure that the cooling system is functioning correctly and adjust or repair it as needed.
3. Take corrective action: Take corrective action to reduce the temperature, such as relocating the device, improving airflow, or replacing faulty components.
4. Monitor sensor readings: Continuously monitor the temperature sensor readings to ensure the issue is resolved and does not reoccur.
5. Update sensor configuration: If necessary, update the sensor configuration to adjust the threshold value or modify the alert settings to prevent false positives or negatives.