SPAGENT-MIB::spVirtual14Status #

Virtual14 sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap:

Meaning #

The SPAGENT-MIB::spVirtual14Status trap is generated when the virtual14 sensor detects an abnormal condition. This trap is sent to alert administrators of a potential issue with the sensor.

Impact #

The impact of this trap depends on the specific sensor and the condition that triggered the trap. Possible impacts include:

• System downtime or instability due to sensor failure
• Inaccurate monitoring or reporting due to sensor malfunction
• Potential security risks if the sensor is related to security monitoring

Diagnosis #

To diagnose the issue, follow these steps:

1. Identify the sensor that triggered the trap using the spSensorIndex and spSensorName variables.
2. Check the spSensorStatus variable to determine the current status of the sensor.
3. Verify the spSensorValue variable to determine the current reading of the sensor.
4. Check the spSensorLevelExceeded variable to determine the threshold that was exceeded, causing the trap to be sent.
5. Consult the spSensorDescription variable for additional information about the sensor and its function.

Mitigation #

To mitigate the issue, follow these steps:

1. Investigate the cause of the sensor malfunction or failure.
2. Take corrective action to resolve the issue, such as replacing the sensor or adjusting the sensor’s configuration.
3. Verify that the sensor is functioning correctly and the trap is no longer being generated.
4. Update any necessary documentation or monitoring configurations to reflect the changes made to the sensor.
5. Consider implementing additional monitoring or redundancy to prevent similar issues in the future.