SPAGENT-MIB::spVirtual9Status #

Virtual9 sensor trap

Variables #

• spSensorStatus
• spSensorValue
• spSensorLevelExceeded
• spSensorIndex
• spSensorName
• spSensorDescription

Definitions #

spSensorStatus

The current integer status of the sensor causing this trap to be sent

spSensorValue

The current integer value of the sensor causing this trap to be sent

spSensorLevelExceeded

The integer level that was exceeded causing this trap to be sent

spSensorIndex

The integer index of the sensor causing this trap to be sent

spSensorName

The name of the sensor causing this trap to be sent

spSensorDescription

The description of the sensor causing this trap to be sent

Here is a runbook for the SNMP trap SPAGENT-MIB::spVirtual9Status:

Meaning #

The SPAGENT-MIB::spVirtual9Status trap is generated when a virtual9 sensor reports a status change. This trap is specific to the virtual9 sensor and is sent when the sensor’s status exceeds a predetermined threshold. The trap provides information about the sensor, including its current status, value, and the level that was exceeded.

Impact #

The impact of this trap depends on the specific sensor and the threshold that was exceeded. However, in general, this trap may indicate a potential issue with the sensor or the system being monitored. For example, if the virtual9 sensor is monitoring temperature, the trap may indicate that the temperature has exceeded a safe or recommended level.

Diagnosis #

To diagnose the issue, follow these steps:

1. Check the spSensorStatus variable to determine the current status of the sensor.
2. Check the spSensorValue variable to determine the current value of the sensor.
3. Check the spSensorLevelExceeded variable to determine the level that was exceeded.
4. Check the spSensorIndex variable to determine the index of the sensor.
5. Check the spSensorName and spSensorDescription variables to determine the name and description of the sensor.
6. Analyze the sensor data to determine the cause of the threshold exceedance.
7. Check the system logs for any related errors or issues.

Mitigation #

To mitigate the issue, follow these steps:

1. Investigate the cause of the threshold exceedance and take corrective action.
2. Check the sensor configuration to ensure it is properly set up and calibrated.
3. Verify that the system is functioning correctly and that there are no other related issues.
4. Consider adjusting the threshold level for the sensor to prevent false positives.
5. Document the incident and the steps taken to resolve it.
6. Consider implementing additional monitoring or alerts to prevent similar issues in the future.